Running an RV Air Conditioner on a Generator: Soft Start and Sizing

Running an RV Air Conditioner on a Generator: Soft Start and Sizing

The 30-second answer: A roof air conditioner needs a large starting surge, often several times its running watts. Size the generator for that surge, not the sticker. If the generator is only just big enough, a soft-start kit can reduce the surge and let it run. Test the setup on a warm day before you need it.

DifficultyEasy to Moderate
Time30 min to test
CostVaries by generator size
ToolsThe AC nameplate, a multimeter

Watch: “Can a Honda eu2200i run a 15,000 BTU RV AC? No soft start” by Schneider & Son on YouTube. A test of a small inverter running an RV air conditioner without a soft start, which shows the starting surge the guide describes.

A running RV air conditioner is one of the hardest loads a portable generator can carry. It doesn’t need much power once it’s running, but the compressor draws a heavy surge when it starts. Owners often find that a generator that runs the AC on a test day stalls on the first hot afternoon, or that the AC won’t start at all when the generator is already running other loads.

Read the AC’s Nameplate

The nameplate on the air conditioner lists the voltage, the amps, and sometimes the running and starting figures. The running watts come from the voltage and amps. The starting figure is often published by the maker or the dealer, and it can be several times the running watts. If the nameplate doesn’t list a starting figure, ask the manufacturer or an RV service center for it.

Add the Other Loads

A typical RV air conditioner is rarely the only load on the generator. The fridge, the water heater if it’s electric, the lights, and the charger may all run at the same time. Add the running watts of everything you plan to run, then add the air conditioner’s starting surge on top. That total is the load the generator has to carry for a moment.

Compare the total with the generator’s rated running watts and its surge rating. If the number is close, a larger generator is the easier fix. The wattage sizing guide walks through the math, and starting watts vs. running watts explains the surge.

Soft-Start Kits

A soft-start device reduces the surge when the compressor starts. It works by easing the motor up to speed rather than letting it jump to full current. Soft starts are sold for many RV air conditioners, and they can make a marginal generator workable. They don’t create power, though, so a generator that’s far too small will still fail. Check that the kit matches your air conditioner’s model and voltage.

Test It Before You Need It

Run the setup on a warm day, with everything else in the RV switched on, before a storm or a heat wave. Watch for three things: the AC should start on the first try, the engine shouldn’t bog, and the lights shouldn’t dim sharply when the compressor kicks on. If any of those happen, reduce the other loads or step up to a larger generator. The output test shows how to measure voltage at the outlet under load.

Keep the Generator Cool and Clear

A generator running an air conditioner on a hot day works hard, and heat reduces its output. Keep the intake and exhaust clear of the RV and of any nearby walls. The guide on power loss at altitude and heat explains why the same unit can produce less power on a hot afternoon.

Never run a generator inside the RV or in a garage, even with the windows open. Exhaust carbon monoxide builds up quickly in a closed space. Place the generator outdoors, away from the RV’s doors, windows, and vents, and use a CO alarm inside the RV.

Frequently Asked Questions

Can a 2,000-watt generator run an RV air conditioner?

Many small generators can’t handle the starting surge of a full-size RV air conditioner. A soft start may help, but check the surge figure before you buy or rely on one.

Why does the AC start and then trip the generator?

The starting surge is higher than the generator can deliver for a moment. Reduce other loads, add a soft start, or use a larger generator.

Can I use an extension cord for the AC?

Use a cord rated for the air conditioner’s amps and keep it short. A thin cord drops voltage, and the compressor struggles on low voltage. The extension cord guide covers the sizing.

Scroll to Top