Check off what you’d actually run at the same time. The panel totals your load and shows what size generator handles it — typical watt values are already loaded, so just tap and go.
Quick start:
Your numbers
Running watts
0
Starting watts
0
Tap a preset or check appliances — your size shows here.
Typical values pre-loaded — the appliance nameplate or a watt meter gives exact draw. Nothing you enter leaves your browser.
Your total so far
Running watts
0
Starting watts
0
—
Add your own appliance
Watts are on the appliance data plate. If it only lists amps: watts = amps × volts.